Consommables de mise sous vide et infusion
Tableaux techniques en anglais
Télécharger le PDF (anglais)Confirmez la qualité choisie et les spécifications actuelles avant de commander.
Vacuum bagging films
| Polymer / layer structure | Gauge (μm) | Width (mm) | Max. temperature (°C) | Colour | Process |
|---|---|---|---|---|---|
| PE Polyethylene | 75 | ≤6000 | 100 | — | Pre-compaction / infusion |
| PA/PE · co-extruded multilayer Polyamide/polyethylene | 50 / 65 / 75 | 4570 / 5500 / 6000 / 8000 / 12000 | 150 | Yellow | Infusion; not autoclave |
| PE/PA Polyethylene/polyamide | 50 | ≤6000 | 150 | — | Pre-compaction / infusion |
| PE/PA Polyethylene/polyamide | 65 | ≤6000 | 150 | — | Oven |
| PA/PE · co-extruded multilayer Polyamide/polyethylene | 55 / 75 | ≤6500 | 165 | Blue | — |
| PA Polyamide | 50 | ≤5000 | 170 | — | Autoclave |
| PA/PE/PA Polyamide/polyethylene/polyamide | 55 / 65 / 75 | — | 180 | Green | — |
| PA Polyamide | 50 / 75 | ≤5000 | 200 | — | Autoclave |
| Modified PA · single layer Modified polyamide | 50 / 75 | ≤3900 | 205 | Green | — |
| Modified PA Modified polyamide | 50 / 75 | ≤4500 | 230 | — | Autoclave |
| Modified PA · single layer Modified polyamide | 55 / 75 | ≤3040 | 230 | Blue | — |
| PTFE Polytetrafluoroethylene | 75 | 1270 | 280 | — | Autoclave |
| Modified PTFE Modified polytetrafluoroethylene | 75 | 1270 | 315 | — | Autoclave |
| PI Polyimide | 50 | 1000 | 400 | — | Autoclave |
Release films for vacuum processing
| Base polymer | Gauge (μm) | Width (mm) | Max. temperature (°C) | Perforation |
|---|---|---|---|---|
| PE Polyethylene | 35±5 | ≤1500 | 120 | Non-perforated / Perforated |
| PP/PE Polypropylene/polyethylene | 35±5 | ≤1500 | 150 | Non-perforated / Perforated |
| PMP Polymethylpentene | 38 / 50 | 1270 | 190 | P1 / P3 / P16 / P31 |
| FEP Fluorinated ethylene propylene | 30±5 | Non-perforated: ≤7100 Perforated: ≤5000 | 204 | Non-perforated / Perforated |
| ETFE Ethylene/tetrafluoroethylene copolymer | 12.5 / 15 / 20 / 25 | 1220-1500 | 230 | Non-perforated / P3 / P6 / P16 |
| ETFE Ethylene/tetrafluoroethylene copolymer | 15 / 20 / 25 | 1270 / 1530 | 230 | P1 / P3 / P16 / P31 |
| FEP Fluorinated ethylene propylene | 12.5 / 15 / 20 / 25 / 50 | 1220-1500 | 260 | Non-perforated / P3 / P6 / P16 |
| FEP Fluorinated ethylene propylene | 20 / 25 | 1270 / 1530 | 260 | P1 / P3 / P16 / P31 |
| PTFE Polytetrafluoroethylene | 25 | 1270 | 315 | P1 / P3 / P16 / P31 |
| PI Polyimide | 25 | 1000 | 400 | P1 / P3 / P16 / P31 |
Peel ply fabrics
| Mass (g/m²) | Fibre | Thickness (mm) | Width (mm) | Max. temperature (°C) | Weave |
|---|---|---|---|---|---|
| 62 | PA66 | 0.106 | 1520 | 200 | Tight weave |
| 85±5% | PA66 | 0.10-0.15 / 0.11-0.15 | 100-1800 | 230 | Plain |
| 85±5% | PET | 0.10-0.15 | 100-1800 | 220 | Plain |
| 85 | PET | 0.110 | 1800 | 180 | — |
| 90±5% | PA6 | 0.10-0.15 | 100-1800 | 230 | Plain |
| 95±5% | PET | 0.12-0.15 | 100-1800 | 220 | Plain |
| 105±5% | PA66 | 0.12-0.18 | 100-1800 | 240 | Plain |
Breather & bleeder fabrics
| Weight (g/m²) | Fibre | Gauge (mm) | Width (mm) | Roll length (m) | Max. use temperature °C |
|---|---|---|---|---|---|
| 150 | PET | — | 1500 / 1520 | 100 | 200 / 205 |
| 150 / 340 | PET 90% / PA 10% | — | 1000 | — | 180 |
| 200 / 340 / 440 | PA | — | — | — | 230 |
| 203 | Glass | — | — | — | 400 |
| 250 | PET | — | 1500 | 50 | 200 |
| 330 | PET | — | 1500 / 1520 | 50 | 200 / 205 |
| 330 | PA/PET | — | 1520 | — | 232 |
| 340 | PET | — | 1500 | 50 | — |
Infusion flow media
| Mass (g/m²) | Polymer | Thickness (mm) | Width (mm) | Roll length (m) | Max. temperature (°C) | Structure / colour |
|---|---|---|---|---|---|---|
| 100 | PP | 0.8 | 1200 | — | 150 | Extruded |
| 105 | PE | 1.0 | — | — | 120 | Extruded / Green |
| 130 | PE | 1.0±0.1 | 2000 / 4000 | 100 / 50 | 120 | Knitted / White / Dark green |
| 145 | PE | 1.0 | — | — | 120 | Woven / Green / Black |
| 150 | PE | 1.0±0.1 | 2000 / 4000 | 100 / 50 | 120 | Knitted / White / Dark green |
| 160 | PE | 1.1±0.1 | 2000 / 4000 | 100 / 50 | 120 | Knitted / White / Dark green |
| 160 | PE | 1.1±0.2 | 1200 | 50 | 120 | Extruded / Yellow |
| 180 | PE | 1.3 | — | — | 120 | Woven / Black |
| 180 | PE | 1.1±0.1 | 2000 / 4000 | 100 / 50 | 120 | Knitted / Dark green |
| 200 | PE | 1.3 /1.3±0.2 | 1200 | 50 | 120 | Extruded / Green / Dark green |
| 250 | PE | 1.4±0.2 | 1200 | 50 | 120 | Extruded / Dark green |
| 460 | PE | 1.7±0.2 | 1000 | 50 | 120 | Extruded / Blue |
Infusion tubing & spiral wrap
| Form | Bore (mm) | Wall (mm) | Max. use temperature °C | Length (m) | Colour |
|---|---|---|---|---|---|
| Tube | 8 | 0.9 | 100 | 100 | White |
| Tube | 10 | 0.9 | 100 | 100 | White |
| Tube | 12 | 0.9 | 100 | 100 | White |
| Tube | 18 | 1.3 | 100 | 100 | White |
| Tube | 10 | 3.0 | 60 | 30 | Green |
| Spiral wrap | 10 | 0.9 | 100 | 100 | White |
| Spiral wrap | 12 | 0.9 | 100 | 100 | White |
| Spiral wrap | 18 | 1.3 | 100 | 100 | White |
| Tube | 8 | — | 100 | — | Transparent / White |
| Tube | 10 | — | 100 | — | Transparent / White |
| Tube | 12 | — | 100 | — | Transparent / Reinforcing rib |
| Tube | 18 | — | 100 | — | Transparent / Reinforcing rib |
| Tube | 35 | — | 100 | — | Transparent / Reinforcing rib |
| Spiral wrap | 10 | — | 100 | — | Transparent / White |
| Spiral wrap | 12 | — | 100 | — | Transparent / White |
| Spiral wrap | 18 | — | 100 | — | Transparent / White |
Infusion blocks, fittings & valves
| Form | Connection dimension | Size (mm) | Max. use temperature °C |
|---|---|---|---|
| Infusion block | ID | 16 | — |
| Infusion block | ID | 35 | — |
| L-connector | OD | 12 | — |
| L-connector | OD | 18 | — |
| T-connector | OD | 10 | ≤120 |
| T-connector | OD | 12 | ≤120 |
| T-connector | OD | 18 | ≤120 |
| Infusion valve | OD | 10 | — |
| Infusion valve | OD | 12 | — |
| Infusion valve | OD | 18 | — |
| Infusion valve | OD | 35 | — |
Omega profiles & infusion channels
| Form | Dimension basis | Size (mm) | Length (m) | Max. use temperature °C |
|---|---|---|---|---|
| Omega profile | Bore | 16 / 22 / 24 | — | 120 |
| Flow channel | Width | 50 / 100 | — | 254 |
| Omega profile | Bore | 16 | 2.5 | 60 |
| Infusion channel | Width | 50 / 100 | — | 100 |
Membrane vacuum evacuation lines
| Form | Width (mm) | Roll length (m) | Max. use temperature °C |
|---|---|---|---|
| Film / mesh / membrane | 150 / 200 / 250 / 300 / 350 | — | 150 |
Adhesive & flash tapes for processing
| Backing / adhesive | Total gauge mm | Width mm | Roll length m | Max. use temperature °C | Colour |
|---|---|---|---|---|---|
| PET / Silicone | 0.068±0.010 | 25 / 50 | 66 | 200 | Blue |
| PTFE / Silicone | 0.090 / 0.114 / 0.165 / 0.190 | 25 / 50 | 32.9184 | 260 | Grey |
Vacuum bagging sealant tapes
| Max. temperature (°C) | Process | Thickness (mm) | Width (mm) | Roll length (m) | Colour | Removal / use |
|---|---|---|---|---|---|---|
| 120 | Infusion | 2 | 10 | 15 | Black | — |
| 120 | Infusion | 2.5 | 12 | 15 | Black | — |
| 120 | Pre-compaction | 3 | 13 | 7.5 / 15 | Black | Reusable for pre-compaction |
| 150 | Oven | 2.5 | 12 | 7.5 / 15 | Yellow | — |
| 150 | Vacuum infusion / RTM | 3 | 12 | 15 | Black | Butyl rubber; removable after cure |
| 150 | Infusion / compaction | 3 | 12 | — | Black | Cool to room temperature before removal |
| 160 | Autoclave | 3 | 13 | 7.5 / 15 | Grey | — |
| 180 | Vacuum infusion / RTM | 3 | 12 | 15 | Yellow | Butyl rubber; removable after cure |
| 200 | Autoclave | 3 | 13 | 7.5 / 15 | Yellow | Remove at60°C; no residue stated |
| 200 | Oven / autoclave | 3.5 | 12.5 | — | Yellow | Remove after cooling |
| 204 | Vacuum infusion / RTM | 3 | 12 | 15 | Yellow | Butyl rubber; removable after cure |
| 230 | Autoclave | 3 | 13 | 7.5 / 15 | Green | Remove at60°C; no residue stated |
| 230 | Autoclave | 3.5 | 12.5 | — | Yellow | Remove after cooling |
| 235 | Autoclave | 3 | 12.5 | — | Green | Remove after cooling |
| 240 | Vacuum infusion / RTM | 3 | 12 | 15 | Yellow / Green | Butyl rubber; removable after cure |
| 280 | Autoclave | 3 | 13 | 7.5 | Blue | High extensibility |
| 400 | Autoclave | 3 | 13 | 7.5 | Light green | Use together with230°C companion tape |
Butyl tapes, sealers & sheets
Dimensional ranges for waterproofing/jointing tapes, moulded sealers and covered butyl sheets.
| Product form | Thickness (mm) | Width (mm) | Length (m) |
|---|---|---|---|
| Single-sided butyl tape | 0.5-2.0 | 10-1000 | 3-20 |
| Mesh-reinforced tape | 0.5-2.0 | 3-1000 | 10-30 |
| Moulded sealer | 0.8-20 | 5-300 | 10-30 |
| Covered waterproofing sheet | 1.0-2.0 | 50-1000 | 10-20 |
Guide de spécification et de qualification
Informations du catalogue
Film gauge, polymer, dimensions and listed maximum temperatures; fittings and consumable options.
À préciser avant la commande
| Thermal cycle | °C; dwell time; pressure Confirm temperature WITH exposure duration, resin and process pressure. |
|---|---|
| Leak tightness & elongation | Pressure decay; % Agree the assembly leak test and allowable decay; film elongation where required. |
| Release & permeability | Perforation; flow; surface Specify release pattern, resin flow and required post-removal surface. |
Télécharger le guide (PDF anglais)
Contrôles et justificatifs